Amana Washer Stuck On Wash
The Amana washing machine is a popular choice for many households. Unfortunately, it’s not immune to the occasional problem. One of the most common issues is when an Amana washer gets stuck on the wash cycle. This can be a real nuisance, as it prevents the washer from completing its cycle, and can potentially cause damage to the appliance. Fortunately, there are a few steps that you can take to troubleshoot and fix your Amana washer when it gets stuck on the wash cycle.
Identifying the Cause of the Problem
When your Amana washer gets stuck on the wash cycle, the first step is to identify the source of the problem. It could be due to an issue with the machine’s settings, a faulty part, or an obstruction in the washer’s drum. To find out what’s causing the issue, open the washer’s lid and check for any visible signs of damage or obstruction. If you don’t find any, then check the settings of the washer to make sure that they are correct.
Checking the Water Supply
Once you’ve identified the source of the problem, the next step is to check the water supply. If the water supply is off, then this could be the reason why your Amana washer is stuck on the wash cycle. To check the water supply, first locate the water inlet valve and make sure that the valve is open. If the valve is closed, then open it and turn on the water supply to the washer. Once the water is running, try running the washer again and see if it’s still stuck on the wash cycle.
Checking the Drain Pump
If the water supply is on and your Amana washer is still stuck on the wash cycle, then you may need to check the drain pump. The drain pump is responsible for draining the water out of the washer once the cycle is finished. If the pump is blocked or damaged, then this can cause the washer to get stuck on the wash cycle. To check the drain pump, first unplug the washer from the power outlet and remove the back panel. Once you’ve done this, check the pump for any visible signs of damage or blockages. If you find any, then you’ll need to replace the pump.
Cleaning the Washer Drum
If you’ve checked the water supply, the drain pump, and the settings of the washer, and your Amana washer is still stuck on the wash cycle, then the next step is to clean the washer drum. If there is a build-up of dirt and debris in the drum, then this can prevent the washer from completing its cycle. To clean the drum, unplug the washer from the power outlet and remove the back panel. Once you’ve done this, use a damp cloth to clean the inside of the drum.
Checking the Motor
If you’ve cleaned the drum and your washer is still stuck on the wash cycle, then you may need to check the motor. The motor is responsible for spinning the drum and agitating the clothes. If the motor is damaged or faulty, then this can prevent the washer from completing its cycle. To check the motor, unplug the washer from the power outlet and remove the back panel. Once you’ve done this, check the motor for any visible signs of damage or blockages. If you find any, then you’ll need to replace the motor.
Contacting a Repair Technician
If you’ve tried all of the troubleshooting steps and your Amana washer is still stuck on the wash cycle, then you may need to contact a repair technician. A repair technician will be able to diagnose the issue and recommend a suitable solution. They may also be able to repair or replace any faulty parts in your washer.
Conclusion
Amana washers are a great choice for many households, but they can occasionally get stuck on the wash cycle. Fortunately, there are a few steps that you can take to troubleshoot and fix your Amana washer. If you’ve tried the troubleshooting steps and your Amana washer is still stuck on the wash cycle, then you may need to contact a repair technician.
Amana NTW4516FW1 Washer: stuck on sensing mode, won't run through full
Amana washer stuck on sensing fill? Try these fixes - MachineLounge
How to Reset an Amana Washer (Full Troubleshooting Guide) - MyHomeDwelling
