2012 Ford Focus Clutch Replacement
Paragraph 1:
Replacing the clutch of a car is necessary task if the clutch is worn or damaged, and the 2012 Ford Focus is no exception. The Focus is a popular car, and many owners are familiar with its mechanics and maintenance, so it is important to know the procedure for replacing the clutch. The clutch in the Ford Focus is a hydraulic system, and it requires special tools and knowledge to replace it correctly.
Paragraph 2:
Understanding the Replacement Process for 2012 Ford Focus Clutch
Replacing the clutch of a 2012 Ford Focus requires a few special tools, such as a clutch alignment tool, a clutch pressure plate and a clutch disc. It is also necessary to use a torque wrench to ensure the correct torque of the various bolts. In addition, you will need to have the correct type of lubricant to lubricate the new clutch parts. You should also have a service manual that can provide a detailed description of the steps involved in replacing the clutch.
Paragraph 3:
Steps to Replace the Clutch in a 2012 Ford Focus
The first step in replacing the clutch in a 2012 Ford Focus is to remove the transmission. This is done by removing the mounting bolts and then lifting the transmission out of the engine bay. It is important to note that the transmission should be supported by a jack or other suitable device at this point. Once the transmission is out of the engine bay, the next step is to remove the driveshaft and the clutch cover.
Paragraph 4:
Once the driveshaft and clutch cover have been removed, the next step is to remove the flywheel. This is done by loosening the bolts that hold the flywheel in place. It is important to use the correct torque wrench when loosening these bolts. Once the flywheel is removed, the next step is to remove the clutch pressure plate and the clutch disc. This is done by loosening the bolts that hold the pressure plate in place.
Paragraph 5:
Installing the New Clutch in a 2012 Ford Focus
Once the old clutch has been removed, the next step is to install the new clutch. This is done by first installing the new clutch disc and pressure plate. The pressure plate should be installed using the correct torque wrench. Once the pressure plate is in place, the next step is to install the flywheel. Again, it is important to use the correct torque wrench when tightening the flywheel bolts.
Paragraph 6:
Once the flywheel has been properly installed, the next step is to install the new transmission. This is done by first lining up the transmission with the engine and then securing it with the mounting bolts. Once the transmission is in place, the next step is to install the driveshaft. Finally, the clutch cover is installed, and the new clutch is ready to go.
Paragraph 7:
Conclusion
Replacing the clutch of a 2012 Ford Focus is not a difficult task, but it does require the use of special tools and knowledge. It is important to use the correct tools and follow the instructions in the service manual to ensure that the job is done correctly. With the correct tools and knowledge, it is possible to replace the clutch of a 2012 Ford Focus without any problems.
For Ford Focus 2012-2018 EXEDY Clutch Kit | eBay
Clutch Ford Focus 2.0l 2012- Embrague Doble Powershift - $ 24,999.00 en
For Ford Focus 2012-2018 LuK 07-233 RepSet Clutch Kit | eBay
