Remove Agitator From Amana Washer
Removing an agitator from an Amana washer can be a bit tricky. However, if you take the time to understand the process and use the right tools, you can get the job done quickly and safely. In this article, we’ll walk you through the steps required to remove the agitator from Amana washing machines.
Step-by-Step Guide to Removing an Agitator From an Amana Washer
Removing an agitator from an Amana washer requires a few simple steps. Here’s how to do it:
Step 1: Unplug the Washer
Before you begin, make sure to unplug your Amana washer. This will prevent any potential electrical shock.
Step 2: Locate the Agitator
Once you’ve unplugged the washer, you’ll need to locate the agitator. The agitator is located in the center of the washer tub.
Step 3: Remove the Agitator Cover
Once you’ve located the agitator, you’ll need to remove the cover. Most Amana washers have a plastic cover that is held in place with two screws. Use a screwdriver to remove the screws and then gently lift the cover off the top of the agitator.
Step 4: Disconnect the Agitator
Once you have removed the cover, you’ll need to disconnect the agitator from the washer. The agitator is connected with two screws. Use a screwdriver to remove the screws and then gently lift the agitator off the washer.
Step 5: Remove the Agitator
Now that the agitator is disconnected from the washer, you’ll need to remove it. Gently lift the agitator out of the washer and set it aside.
Step 6: Clean the Washer Tub
Once the agitator is removed, you’ll need to clean the washer tub. Use warm, soapy water and a soft cloth to remove any dirt or debris.
Step 7: Reassemble the Washer
Once the washer tub is clean, you’ll need to reassemble the washer. Put the agitator back in place and then reattach the screws to secure it. Put the cover back on the agitator and then reattach the screws. Finally, plug the washer back in.
Conclusion
Removing an agitator from an Amana washer can be a bit tricky. But with the right tools and a little patience, you can get the job done quickly and safely. Follow the steps outlined above and you’ll be able to remove your Amana washer’s agitator in no time.