2017 Mazda Cx 5 Oil Reset
Mazda CX-5 is a popular compact crossover in the market released by Mazda in 2017. It is a great choice for those who need a comfortable ride with plenty of power under the hood. The CX-5 is powered by a 2.5L SkyActiv-G engine that produces 187 horsepower and 185 lb-ft of torque. The engine is mated to a six-speed automatic transmission and is available in both front-wheel drive and all-wheel drive configurations. The CX-5 is also available with a variety of driver-assist technologies, including Mazda's i-ACTIVSENSE safety suite. One of the most important maintenance tasks on the CX-5 is to reset the oil service light after an oil change. This article will explain how to reset the oil service light on the 2017 Mazda CX-5.
How to Reset the Oil Service Light on a 2017 Mazda CX-5
The 2017 Mazda CX-5 uses a system which will alert you when it is time to change the oil. This alert system is known as a “maintenance reminder light” or “oil service light”. When the oil service light illuminates, it is time to perform an oil change. The oil service light can be reset using the on-board diagnostics system.
Step 1: Turn on the Ignition
The first step is to turn on the ignition switch without starting the engine. For the 2017 Mazda CX-5, the ignition switch is located on the left side of the steering wheel.
Step 2: Locate the Reset Button
The next step is to locate the reset button. On the 2017 Mazda CX-5, the reset button is located on the instrument panel, just to the left of the steering wheel. The reset button is a small, black button with a white arrow pointing up.
Step 3: Press and Hold the Reset Button
Once the reset button has been located, press and hold it for approximately 5 seconds. After 5 seconds, the oil service light should turn off indicating that the oil service reminder has been reset.
Step 4: Start the Engine
Once the oil service light has been reset, start the engine to ensure that the oil service light does not illuminate again.
Additional Tips
It is important to note that the oil service light will only reset after a new oil filter is installed and the oil is replaced. If the oil service light remains on after the oil has been changed, the oil filter may need to be replaced.
It is also important to remember that the 2017 Mazda CX-5 requires 5W-30 synthetic oil. If a different type of oil is used, engine damage may occur.
In conclusion, resetting the oil service light on the 2017 Mazda CX-5 is a simple process. All that is required is to turn on the ignition, locate the reset button, press and hold it for 5 seconds, and start the engine. It is important to remember to use the correct type of oil when performing an oil change. Following these steps will ensure that the oil service light is reset properly and the engine is running at its best.
Oil Reset » Blog Archive » 2016 Mazda CX-5 Maintenance Light Reset
Mazda CX-5 Service Light Reset - YouTube
Mazda Cx 5 Black Wheels - Mazda CX 5 2019
