Maytag Washer Not Turning On
When a washer isn’t turning on, it’s usually because of an issue with the power supply. Without power, the washer won’t start and no amount of pushing buttons or jiggling wires will get it to work. Before taking a closer look at the washer, it’s important to make sure that the power is actually on. It is possible that the power has tripped or the outlet is bad or that a fuse or breaker has been tripped. Once it’s established that the power is on, the next step is to ensure that the washer is properly plugged in. If the cord is loose, unplug it and plug it back in firmly.
Checking the Washer’s Power Supply: A Troubleshooting Guide
It’s important to make sure that the power supply to the washer is functioning correctly before taking a closer look. If the power is off, the washer won’t turn on no matter what. The power supply should be checked first and foremost. To do this, first check the power outlet. Make sure that it’s working properly and that it’s not a bad outlet. If it’s a bad outlet, replace it.
Next, check the fuse or breaker. If the fuse or breaker is tripped, reset it and try turning the washer on again. If the fuse or breaker trips again, the issue may be with the washer itself. If the fuse or breaker is not tripped, the issue may be with the washer.
Checking the Washer’s Wiring and Connections
If the power supply is functioning properly, the next step is to check the wiring and connections of the washer. Make sure that all of the wires are connected properly and that none of them are loose. Also, make sure that the washer is plugged in properly. If any of the wires are loose, reconnect them. If the washer is not plugged in properly, unplug it and plug it back in firmly.
Checking the Washer’s Power Switch
If the wiring and connections are all in order, the next step is to check the power switch. If the power switch is faulty, it may be necessary to replace it. To check the power switch, unplug the washer and remove the back panel. Locate the power switch and check it for any signs of damage or wear. If it appears to be in good condition, try pressing it to see if it works. If it does not work, it will need to be replaced.
Checking the Washer’s Control Panel
If the power switch is working properly, the next step is to check the control panel. Make sure that all of the buttons are properly connected and that none of them are stuck. If any of the buttons are stuck, try pressing them to see if they will reset. If they do not reset, they may need to be replaced.
Checking the Washer’s Water Supply
Finally, check the water supply to the washer. If the water supply is not connected properly or if there is a blockage in the line, it can prevent the washer from turning on. Make sure that the water supply lines are connected properly and that there are no blockages.
Conclusion
If a Maytag washer is not turning on, there are several potential causes. It is important to check the power supply, wiring and connections, power switch, control panel, and water supply to ensure that they are all functioning properly. If any of these components are not working properly, they may need to be replaced or repaired.
Maytag Bravos Washer Not Agitating – 4 Reasons and Solutions To Clean
My Maytag washer model MVWX655DW1 is not spinning properly. On rinse
5 Reasons Why Maytag Washer Is Not Turning On – DIY Appliance Repairs
