Whirlpool Washer Making Noise When Sensing
There are many reasons why your Whirlpool Washer may be making noise when sensing, and identifying the source of the noise can be the key to resolving the issue. Washer noises can range from squeaks and squeals to clunks and hums. If you are experiencing noise when the washer is sensing, it is important to diagnose the source of the noise and determine the best course of action. This article will look at the common causes of washer noise when sensing, provide troubleshooting tips, and discuss some of the best ways to eliminate the noise.
Common Causes of Washer Noise When Sensing
When a Whirlpool Washer is making noise when sensing, it is typically caused by something that is either loose or out of balance. The most common causes of this noise are worn or loose suspension components, unbalanced loads, and worn drive components. Worn suspension components can cause the washer to move around during sensing, which can cause a loud noise. Unbalanced loads can also cause noise, as the washer is trying to compensate for the uneven load. Worn drive components can also cause noise, as the washer has to work harder to complete the cycle.
Troubleshooting Tips
The first step in troubleshooting washer noise when sensing is to check the suspension components. If any of the suspension components are worn or loose, they should be replaced. To inspect the suspension components, you will need to access the back of the washer and check for any wear or looseness. If any of the components are worn or loose, they should be replaced.
Next, you should inspect the drive components. If any of the drive components are worn or damaged, they should be replaced. To inspect the drive components, you will need to access the back of the washer and check for any wear or damage. If any of the components are worn or damaged, they should be replaced.
Eliminate Washer Noise When Sensing
To eliminate washer noise when sensing, you should check for unbalanced loads. Unbalanced loads can cause the washer to make noise as it is trying to compensate for the uneven load. To check for unbalanced loads, you should run a diagnostic cycle on your washer and check the results. If the washer detects an unbalanced load, you should rearrange the laundry and run the diagnostic cycle again.
Another way to eliminate washer noise when sensing is to check the drain pump. If the drain pump is clogged or blocked, it can cause the washer to make noise as it is struggling to drain the water. To check the drain pump, you should access the back of the washer and remove the drain hose. If the pump is clogged or blocked, it should be cleaned or replaced.
Finally, you should check for any issues with the motor. If the motor is malfunctioning, it can cause the washer to make noise as it is struggling to complete the cycle. To check the motor, you should access the back of the washer and inspect the motor for any damage or wear. If the motor is damaged or worn, it should be replaced.
Conclusion
Noise coming from a Whirlpool Washer when it is sensing can be caused by a variety of issues, such as worn or loose suspension components, unbalanced loads, and worn drive components. To eliminate the noise, it is important to diagnose the source of the issue and determine the best course of action. Troubleshooting tips include checking the suspension components, drive components, unbalanced loads, and motor. Once the source of the noise has been identified, it is important to take the necessary steps to eliminate the noise and ensure the washer is working properly.
Whirlpool washing machine making whining noise. - YouTube
Whirlpool washer noise when spinning stops - YouTube
Whirlpool washer noise. - YouTube
