Washing Machine Will Not Agitate But Will Spin And Drain
Paragraph 1
If you own a washing machine, you may have encountered a problem where it will not agitate but will still spin and drain. This can be a frustrating problem, as it can mean that your clothes are not being properly cleaned. There are several potential causes for this issue, and the steps to take to diagnose and repair the issue can vary depending on the specific make and model of your washing machine.
Common Causes of a Washing Machine Not Agitating But Spinning and Draining
Paragraph 2
One of the most common causes of a washing machine not agitating but spinning and draining is a broken or worn-out belt. If the belt is worn out, it can cause the agitator to not move properly, but it will still be able to spin and drain. To determine if this is the issue, you will need to open up the washing machine and inspect the belt. If it is cracked, frayed, or otherwise damaged, it will need to be replaced.
Other Reasons a Washing Machine May Not Agitate But Spin and Drain
Paragraph 3
In addition to a broken or worn-out belt, there are a few other potential causes of a washing machine not agitating but spinning and draining. One of these is a worn-out clutch assembly, which can cause the agitator to not move properly. Another potential cause is a broken or loose drive shaft, which can also cause the agitator to not move properly.
Diagnosing and Repairing a Washing Machine Not Agitating But Spinning and Draining
Paragraph 4
If you have determined that the belt is not the cause of the issue, you will need to determine if it is the clutch assembly or drive shaft that is causing the problem. To do this, you will need to remove the top of the washing machine and inspect the parts. If either the clutch assembly or drive shaft is broken or loose, it will need to be replaced. If they are both in good condition, then the issue will likely be with the motor or a control board.
Paragraph 5
If the issue is with the motor or control board, you will need to have the parts replaced. This is a more complex repair and will likely require the assistance of a professional. It is important to be sure that the issue is with the motor or control board before replacing them, as replacing them unnecessarily can be a costly repair.
Paragraph 6
In addition to the potential causes listed above, there are a few other possibilities. If none of the potential causes listed above are the issue, it is possible that the issue is with the timer, the water pump, or an electrical issue. If this is the case, it is best to have the issue looked at by a professional and have the necessary parts replaced.
Paragraph 7
No matter what the cause of the issue is, it is important to have the problem looked at promptly in order to avoid any further damage. If the issue is not addressed in a timely manner, it can cause further damage to the machine, which can result in a more expensive repair.
Conclusion
When a washing machine is not agitating but is spinning and draining, it can be a frustrating problem. There are a few potential causes for this issue, including a broken or worn-out belt, a worn-out clutch assembly, a broken or loose drive shaft, a motor or control board issue, or a timer or water pump issue. It is important to have the issue looked at promptly in order to avoid any further damage, as the repair can become more expensive if the issue is not addressed in a timely manner.
Washer Won T Spin Or Agitate | Tyres2c
Washer Won't Spin or Drain - Easy Fix - YouTube
We have a Kenmore 600 series washer. The water won't drain and the
