Why Is My Maytag Washer Stuck On Sensing
Why Is My Maytag Washer Stuck On Sensing?
If you own a Maytag washer, it may be stuck on the sensing cycle. This is a common issue and can be resolved with a few simple steps. In this article, we'll discuss why your Maytag washer may be stuck on sensing and how to fix the problem.
What Is the Sensing Cycle on a Maytag Washer?
The sensing cycle is a common feature on modern Maytag washers. During the sensing cycle, the washer will use sensors to determine the size of the load and the amount of water needed for the cycle. Depending on the model, the washer may also adjust the wash settings to match the size and type of laundry that you have placed in the washer.
Why Is My Maytag Washer Stuck On Sensing?
There are several reasons why your Maytag washer may be stuck on the sensing cycle. One of the most common causes is an unbalanced load. If the load is not evenly distributed in the washer, the machine will not be able to sense the correct amount of water or the proper wash settings. Additionally, a clogged drain hose or filter may prevent the washer from properly sensing the load.
How to Fix a Maytag Washer Stuck On Sensing
If your Maytag washer is stuck on sensing, there are a few steps you can take to try and fix the issue. First, check to make sure the load is evenly distributed in the washer. If it isn't, redistribute the clothes so that the load is balanced and restart the cycle. If the washer is still stuck on sensing, try checking the drain hose and filter for any clogs. If there is a clog, clear it and restart the cycle.
Are There Any Other Causes of a Stuck Sensing Cycle?
In some cases, the issue may be caused by a faulty water inlet valve. This valve is responsible for controlling the amount of water that enters the washer during the sensing cycle. If the valve is defective, it may cause the washer to get stuck on sensing. If you suspect this is the case, you should contact a Maytag repair technician.
Is My Maytag Washer Under Warranty?
If your Maytag washer is still under warranty, you may be able to get it fixed or replaced for free. Check the manufacturer's website to see if your model is covered by the warranty. Additionally, you may be able to find a local Maytag repair technician who can help diagnose and repair the issue.
Conclusion
If your Maytag washer is stuck on sensing, the issue is likely caused by an unbalanced load, a clogged drain hose or filter, or a faulty water inlet valve. To resolve the issue, you can redistribute the load, check for clogs, or contact a Maytag repair technician. If your model is still under warranty, you may be able to get it fixed or replaced for free.
Maytag Bravos Washer Stuck On Sensing: 5 Quick Fixes
Whirlpool Washer Stuck On Sensing | Minimum Repair
Maytag Bravos Washer Stuck On Sensing? (Quick Answer) 2022
