Lid Switch On Whirlpool Washer
Lid switches are a critical piece of technology that is used in many appliances, including Whirlpool washers. A lid switch is a safety device that will prevent the washer from operating if the lid is open. This type of switch is designed to protect you from the potential hazard of the washer running without the lid being closed. It is important to understand how a lid switch works and how to replace it if it becomes defective.
What Is a Lid Switch On a Whirlpool Washer?
A lid switch is a safety device that is designed to prevent the washer from running when the lid is open. This switch will typically be located at the top of the washer, near the lid. When the lid is closed, the switch is pressed and the washer will begin its cycle. If the lid is open, the switch is not pressed and the washer will not start.
Why Does a Whirlpool Washer Need a Lid Switch?
The lid switch is an important safety device that prevents the washer from running when the lid is open. Without this switch, it would be possible for the washer to start running even if the lid was open. This could be a potential hazard, as the washer could be filled with hot water and detergent, and the lid could be open without the user realizing it.
What Are the Symptoms of a Defective Lid Switch?
If the lid switch on a Whirlpool washer is defective, the washer will not start. The washer may also make a buzzing noise when the lid is closed and the start button is pressed. If the switch is defective, it will need to be replaced.
How Do You Replace a Lid Switch on a Whirlpool Washer?
Replacing a lid switch on a Whirlpool washer is a simple process. First, the power to the washer must be disconnected by unplugging the power cord from the wall outlet. Then, the top of the washer must be raised so that the switch can be accessed. The old switch must then be disconnected from the wiring harness and the new switch must be connected in its place. Finally, the top of the washer should be lowered and the power should be reconnected.
What Are the Risks of Replacing a Lid Switch?
Replacing a lid switch is a simple process, but there are some risks involved. There is a risk of electric shock if the power is not disconnected properly. There is also a risk of damage to the washer if the top is raised too high or if the switch is not connected correctly.
What Are the Benefits of Replacing a Lid Switch?
Replacing a lid switch on a Whirlpool washer will restore the safety feature that prevents the washer from running when the lid is open. This will help to reduce the potential hazard of the washer starting when the lid is open.
Conclusion:
Replacing a lid switch on a Whirlpool washer is a simple process that can help to restore the safety feature that prevents the washer from running when the lid is open. It is important to understand the risks involved in replacing a lid switch, as there is a risk of electric shock and damage to the washer if the process is not done correctly. However, the benefits of replacing a lid switch far outweigh the risks and it is a important step in ensuring the safety of your Whirlpool washer.
2 PACK 3949247 Washer Lid Switch Whirlpool Kenmore 3949237 3949239
Washer Washing Lid Switch for WP3949238 Whirlpool Kenmore AP6008880
Whirlpool Lid Switch 3949238 - Walmart.com - Walmart.com
