Troy Bilt Snowblower Not Starting
Troy Bilt makes a wide range of snow blowers that make clearing the driveway a breeze. Unfortunately, sometimes they can experience issues. One common problem that can occur is a Troy Bilt snow blower not starting. This can be caused by a variety of different issues, from a clogged fuel filter to a faulty spark plug. It’s not always easy to figure out why your snow blower isn’t starting. In this article, we’ll walk you through the steps to troubleshoot your Troy Bilt snow blower so you can get it running again.
Check the Fuel Filter and Line
The first step when troubleshooting a Troy Bilt snow blower is to check the fuel filter and line. This is one of the most common causes of a snow blower not starting. The fuel filter is located between the fuel tank and the carburetor. If it’s clogged, it won’t allow enough fuel to get to the carburetor, which will prevent the snow blower from starting. To check the fuel filter, remove it and inspect it for any debris or blockages. If it’s clean, reinstall it and move on to the next step.
Replace the Spark Plug
The spark plug is another common culprit when it comes to a snow blower not starting. It’s responsible for providing the spark that ignites the fuel and air mixture in the combustion chamber. If the spark plug is worn out or has become corroded, it won’t be able to generate the necessary spark. To test the spark plug, remove it from the engine and inspect it for any cracks or damage. If the spark plug is damaged, replace it with a new one.
Check the Carburetor
The carburetor is responsible for controlling the amount of fuel and air that is delivered to the engine. If the carburetor is dirty or clogged, it won’t be able to deliver the right amount of fuel and air, which can cause a snow blower not starting. To inspect the carburetor, remove the air filter and check for any dirt or debris that may be blocking the fuel and air mixture. If the carburetor looks clean, reinstall the air filter and move on to the next step.
Check the Ignition Coil and Module
The ignition coil and module are responsible for generating the spark that ignites the fuel and air mixture in the combustion chamber. If either of these components is failing, it can cause a snow blower not starting. To test the ignition coil and module, remove them from the engine and inspect them for any cracks or damage. If they look fine, reinstall them and move on to the next step.
Check the Flywheel
The flywheel is responsible for transferring the power from the engine to the auger and impeller. If the flywheel is damaged or worn out, it won’t be able to transfer the power, which can cause a snow blower not starting. To inspect the flywheel, remove it from the engine and inspect it for any cracks or damage. If the flywheel is damaged, replace it with a new one.
Check the Battery
If your Troy Bilt snow blower is electric, check the battery to make sure it has enough charge. If the battery is dead or low on power, it won’t be able to provide enough power to start the engine. To test the battery, use a voltmeter to check the voltage. If the voltage is low, recharge the battery or replace it with a new one.
Conclusion
Troubleshooting a Troy Bilt snow blower not starting can be a tricky process, but if you follow the steps outlined in this article, you should be able to get it up and running again in no time. Start by checking the fuel filter and line, then move on to the spark plug, carburetor, ignition coil and module, flywheel, and battery. If all else fails, contact a professional for help.
My Snow Blower Won't Start | Troy-Bilt, Cub Cadet, Craftsman, MTD - YouTube
Snowblower Troy built startup OHV problem won't start help - YouTube
Troy Bilt 2410 Snow Blower: NO START BUT IT RAN LAST YEAR HOW TO FIX
