Maytag Centennial Washer Stuck On Sensing

Maytag Centennial Washer Stuck On Sensing
Have you ever had a problem with your Maytag Centennial washer sticking on the sensing cycle? If so, you have probably wondered what the problem is and how you can fix it. This article will provide you with an overview of the issue and what you can do to get your washer back to working order.

What is the Sensing Cycle?

The sensing cycle on a Maytag Centennial washer is a feature designed to detect the amount of clothes and water in the washer and adjust the wash cycle accordingly. This is done by a combination of sensors that measure the weight of the clothes and the level of water in the washer. If the machine detects too little water or too much weight, it will switch to the sensing cycle and fill the washer with more water or spin to redistribute the clothing.

What Causes the Washer to Get Stuck on Sensing?

There are several reasons why your washer may get stuck on sensing. The most common cause is a faulty water level sensor. If the sensor is not working properly, it may not be able to detect the correct amount of water in the washer and will stay stuck on sensing. Another cause could be a malfunctioning load size sensor. This sensor measures the weight of the clothes in the washer and if it is not working properly, it will not be able to detect the correct load size.

How to Fix the Washer Stuck on Sensing Issue?

The first step is to identify the source of the problem. If the water level sensor is malfunctioning, it will need to be replaced. If the load size sensor is not working properly, it may need to be adjusted or reset. Once the source of the issue is identified, the appropriate fix can be applied.

In the case of a faulty water level sensor, the sensor will need to be replaced. The best way to do this is to contact a Maytag repair technician who can diagnose and replace the faulty part. If the load size sensor is not functioning properly, the technician may be able to reset it or adjust it.

Tips to Prevent Washer from Getting Stuck on Sensing

There are a few simple tips that can help prevent your washer from getting stuck on sensing. First, make sure the washer is filled with the correct amount of water. Too little or too much water can cause the machine to switch to the sensing cycle.

Second, make sure the clothes are evenly distributed in the washer. Unevenly distributed clothes can cause the machine to switch to the sensing cycle. Third, make sure the load size sensor is adjusted correctly. If the sensor is not calibrated correctly, it may not be able to detect the correct load size.

Finally, if you are having trouble with the washer getting stuck on sensing, contact a Maytag repair technician. They can diagnose and fix the issue quickly and efficiently.

Conclusion
The Maytag Centennial washer can get stuck on sensing due to a faulty water level sensor or load size sensor. To prevent this issue, make sure the washer is filled with the correct amount of water, the clothes are evenly distributed, and the load size sensor is correctly calibrated. If the issue persists, contact a Maytag repair technician who can diagnose and fix the issue.

Maytag Centennial Washer Stuck On Sensing? – Upgraded Home

Image by upgradedhome.com |

Maytag centennial washer stuck on sensing [Fixed!] - MachineLounge

Image by machinelounge.com |

Maytag Bravos Washer Stuck On Sensing: 5 Quick Fixes

Image by www.funktionalhome.com |

Share this post