Kenmore Series 500 Washer Reset
The Kenmore Series 500 Washer is a reliable and durable washing machine model. It is a front-loading, high-efficiency washer that is easy to use and maintain. It features a large capacity, adjustable water levels, multiple washing cycles, and an energy-saving, low-water setting. Despite its efficiency and convenience, the Series 500 Washer may sometimes need a reset to get back in working order. Knowing how to reset the washer will help you to keep it running smoothly.
Step-by-Step Guide to Reset a Kenmore Series 500 Washer
To reset the washer, you must first unplug the power cord from the wall outlet. Wait at least 10 seconds before plugging the cord back into the outlet. This will reset the washer’s internal computer and give you a clean slate to work from.
Check the Water Supply
Once you reset the washer, it is important to check the water supply. Make sure that the hot and cold water supply valves are in the “on” position and that the hoses are connected securely. If the hoses are loose, tighten them and make sure that the washer is connected to the water supply.
Confirm the Power
Once you’ve checked the water supply, confirm that the power is on. Make sure that the power cord is plugged into a working outlet. If the outlet has a switch, make sure that it is in the “on” position. You should also check the circuit breaker in your home to make sure that it is not tripped.
Run a Test Cycle
Once you’ve confirmed that the power and water are connected and on, you can run a test cycle. Select the “Normal” cycle and press the “Start” button. The washer should begin filling with water and running through the cycle as normal. If it does not, you may need to reset the washer again.
Check for Error Codes
If the washer does not run through a test cycle, you should check for error codes. The error codes indicate a problem with the washer and can help you determine what is wrong. The error codes can be found in the user manual. Once you locate the code, you can look up the corresponding solution in the manual.
Check for Obstructions
If there are no error codes, you should check for any obstructions in the washer. Make sure that the drum is not blocked by any clothing or debris. If there is something blocking the drum, remove it and try running a test cycle again.
Replace the Washer
If none of the above steps work, you may need to replace the washer. If the washer is more than five years old, it may be time to invest in a new model. If the washer is less than five years old, it may still be under warranty and you can contact the manufacturer for assistance.
Conclusion
Resetting a Kenmore Series 500 Washer can be done quickly and easily. Unplugging the power cord and plugging it back in will reset the washer’s internal computer. You should also check the water supply, confirm that the power is on, and run a test cycle. If the washer is not running properly, check for error codes and obstructions. If none of these steps work, you may need to replace the washer.
How To Reset Kenmore Washer Series 500 - Biointerchange
How To Reset Kenmore Washer Series 500
How To Reset Kenmore Washer 500 Series
