Maytag Bravos Washer Stuck On Sensing
Maytag Bravos Washer is one of the most popular washing machines on the market today. It is known for its reliability and performance, but even the best machines can run into problems. If your Maytag Bravos Washer is stuck on sensing, there are a few steps you can take to get it running again.
Steps to Troubleshoot Maytag Bravos Washer Stuck On Sensing
The first step to troubleshooting your Maytag Bravos Washer is to make sure it is receiving power. Check the power cord and the outlet it is plugged into to make sure everything is properly connected. If you find that your washer is not receiving power, you may need to reset the circuit breaker or replace the fuse.
Next, you will want to check the washer’s control lock. The control lock is a safety feature that is designed to prevent accidental starts. If the control lock is engaged, the washer will be stuck on sensing. To disengage the control lock, press and hold the control lock button for three seconds.
If the control lock is not the problem, you may need to reset the washer. To do this, unplug the washer and plug it back in. Once it is plugged back in, press and hold the start button for five seconds. This will reset the washer and should get it running again.
If the washer is still stuck on sensing, the issue may be with the water level. To fix this, check the water level switch. This switch is located on the back of the washer. If it is corroded or damaged, it will need to be replaced.
You may also need to check the water inlet valve. This valve is responsible for regulating the amount of water that enters the washer. If the valve is stuck open or closed, it can cause the washer to get stuck on sensing. To fix this, you will need to replace the water inlet valve.
Finally, you may need to check the washer’s drain hose. If the hose is kinked or clogged, it can cause the washer to get stuck on sensing. To fix this, you will need to unclog or replace the drain hose.
Conclusion
If your Maytag Bravos Washer is stuck on sensing, there are several steps you can take to troubleshoot the issue. Make sure the washer is receiving power and check the control lock, water level switch, water inlet valve, and drain hose. With a little bit of troubleshooting, you should be able to get your washer running again.
Maytag Bravos Washer Stuck On Sensing: 5 Quick Fixes
Maytag Bravos Washer Stuck On Sensing: 5 Quick Fixes
Maytag bravos washer stuck on sensing – what to try if your Maytag
