Silverado Extended Cab Window Replacement
Replacing a window in an extended cab Silverado can be a difficult process, but with the right tools and a bit of know-how, it is a task that anyone can do. Before attempting to replace a window in an extended cab Silverado, make sure to have the right supplies and tools. If you are not familiar with the process of window replacement, it is a good idea to seek the help of an experienced professional.
Gather the Necessary Tools and Supplies
The tools and supplies needed to replace a window in an extended cab Silverado will vary based on the type of window being replaced. Generally, the tools and supplies needed include a breaker bar, socket set, tape measure, wire cutters, a glass cutting tool, caulking gun, and window sealant. If the window you are replacing is a side window, you may also need a utility knife and a window regulator. Make sure to have all of the necessary tools and supplies before starting the replacement process.
Remove the Old Window
Once you have gathered all of the necessary tools and supplies, you can begin the process of removing the old window. Start by using the breaker bar to remove the screws that hold the window in place. Then, use the wire cutters to remove the window sealant around the window frame. Carefully remove the window from the frame, being careful not to break the window.
Cut and Install the New Window
The next step in the window replacement process is to measure and cut the new window. Use the tape measure to measure the window frame and then use the glass cutting tool to cut the new window to size. Once the new window has been cut to size, use the caulking gun to apply the window sealant to the frame. Then, carefully install the new window into the frame and secure it with the screws.
Replace the Window Regulator
If the window being replaced is a side window, then you will need to replace the window regulator. Start by using the breaker bar to remove the screws that hold the window regulator in place. Then, carefully remove the window regulator from the window frame and replace it with the new one. Once the new window regulator has been installed, secure it with the screws.
Check for Leaks and Finish the Installation
Once the new window has been installed, make sure to check for any leaks. Check the window sealant to make sure there are no gaps or cracks. Then, check the window regulator to make sure it is secure and functioning properly. Once you have finished checking for leaks, you can finish the installation by trimming any excess window sealant.
Conclusion
Replacing a window in an extended cab Silverado is a relatively straightforward process, but it is important to have the right tools and supplies. Make sure to have all of the necessary tools and supplies before starting the process and be sure to check for leaks before finishing the installation. With the right preparation and know-how, anyone can replace a window in an extended cab Silverado.
4pc Stainless Steel Window Sill Trim for 2007-13 Chevy Silverado
Compatible with 01-07 Chevy Silverado GMC Sierra Extended Cab Acrylic
For 2014-16 2017 2018 Chevrolet Silverado 1500 Window Visor Extended
