Jenn Air Refrigerator Not Cooling
Jenn-Air Refrigerator Not Cooling? Here’s What to Do
Jenn-Air refrigerators are designed to keep food at a safe temperature and provide reliable performance. But what happens when your refrigerator stops cooling? There are a few steps you can take to diagnose and repair the issue. Here’s what you need to know about fixing a Jenn-Air refrigerator that is not cooling.
Troubleshoot Your Jenn-Air Refrigerator
The first step in diagnosing why your Jenn-Air refrigerator is not cooling is to troubleshoot the appliance. Start by checking the temperature setting. If the temperature is set too high, the refrigerator won’t cool properly. Make sure the temperature is set between 34 and 38 degrees Fahrenheit. If the temperature is set correctly, check the condenser coils. If the coils are dirty, the refrigerator won’t cool efficiently. Vacuum the coils to remove any dust and debris. If the coils are not dirty, you may have a problem with the evaporator fan motor. This is a common issue with Jenn-Air refrigerators.
Check the Evaporator Fan Motor
The evaporator fan motor is responsible for circulating air throughout the refrigerator. If the motor is not working properly, the refrigerator won’t cool. To check the fan motor, unplug the refrigerator and remove the back panel of the refrigerator. You should be able to see the fan motor. Use a multimeter to test the motor and make sure it is receiving power. If the motor is not receiving power, you may need to replace it.
Clean the Coils and Check the Seals
If the fan motor is working properly, the next step is to clean the condenser coils. As mentioned before, dirty coils can prevent the refrigerator from cooling. Vacuum the coils to remove any dust and debris. Once the coils are clean, check the door seals. If the seals are worn, air can leak out and the refrigerator won’t cool efficiently. Clean the seals and make sure they are in good condition.
Check the Condenser Fan
The condenser fan is responsible for removing heat from the condenser coils. If the fan is not working, the coils won’t be able to dissipate heat and the refrigerator won’t cool. To check the fan, remove the back panel of the refrigerator and inspect the fan. If the fan is not working, you may need to replace it.
Replace the Temperature Control Board
If the fan is working properly, the next step is to check the temperature control board. The temperature control board is responsible for regulating the temperature of the refrigerator. If the board is faulty, the refrigerator won’t cool. To check the board, unplug the refrigerator and remove the back panel. Use a multimeter to test the board and make sure it is receiving power. If the board is not receiving power, you may need to replace it.
Check the Compressor
The compressor is responsible for circulating refrigerant throughout the refrigerator. If the compressor is not working, the refrigerator won’t cool. To check the compressor, unplug the refrigerator and remove the back panel. Use a multimeter to test the compressor and make sure it is receiving power. If the compressor is not receiving power, you may need to replace it.
Conclusion
Fixing a Jenn-Air refrigerator that is not cooling can be a daunting task. But by following the steps outlined above, you should be able to identify and repair the issue. Start by troubleshooting the appliance, then check the evaporator fan motor, clean the condenser coils, check the seals, and inspect the condenser fan. If the fan is working, you may need to replace the temperature control board or the compressor. With the right tools and a bit of patience, you should be able to repair your Jenn-Air refrigerator and get it cooling again.
Jenn Air Refrigerator Repair
Jenn-Air French Bottom Freezer Refrigerator - JFC2290REP
Jenn-Air JFC2290VEM 21.8 cu. ft. French-Door Bottom Freezer
