Ge Washer Leaking From Bottom
Leaking from the bottom of a GE washer can be a worrisome problem. Homeowners often panic when they see a pool of water forming around the base of their washing machine. Fortunately, the cause of the leak can usually be identified and remedied with relative ease. In this article, we will discuss some of the most common causes of a GE washer leaking from the bottom and the steps you can take to fix the issue.
Check the Hoses and Connections
One of the most common causes of a GE washer leaking from the bottom is a problem with the hoses or connections. The water supply hoses, drain hose, and inlet valve at the back of the washer can all be sources of leaks. Check the hoses and connections for cracks, damage, or any other signs of wear and tear. If any of the hoses or connections are damaged or worn, you should replace them immediately.
Inspect the Door Seal
Another possible cause of a GE washer leaking from the bottom is a problem with the door seal. The door seal is the rubber ring that fits around the door opening. Over time, this seal can become cracked or worn, allowing water to escape from the washer and leak out of the bottom. Inspect the door seal for signs of damage and, if needed, replace it with a new one.
Check the Pump Filter
The pump filter is a small trap located in the front of the washer that collects lint and other debris during the wash cycle. If the pump filter is clogged, it can cause the washer to leak from the bottom. To check the pump filter, remove the front panel of the washer and locate the filter. Clean out any lint or debris that has collected in the filter.
Inspect the Drain Hose
The drain hose is the flexible pipe that connects the washer to the wall drain. If the drain hose is loose, damaged, or clogged, it can cause the washer to leak from the bottom. Inspect the drain hose for any signs of wear and tear and make sure that it is securely attached to the wall drain.
Check the Water Level Pressure Switch
The water level pressure switch is a small switch located inside the washer cabinet. This switch is responsible for regulating the water level in the washer. If the water level pressure switch is faulty, it can cause the washer to leak from the bottom. To check the pressure switch, remove the back panel of the washer and locate the switch.
Check the Inlet Valve
The inlet valve is the valve that allows water to enter the washer. If the inlet valve is damaged, it can cause the washer to leak from the bottom. To check the inlet valve, remove the back panel of the washer and locate the valve. Check for any signs of damage or wear and tear and, if necessary, replace the valve.
Conclusion
Identifying and remedying a GE washer leaking from the bottom is usually a straightforward process. In most cases, the cause of the leak can be traced back to a problem with the hoses or connections, the door seal, the pump filter, the drain hose, the water level pressure switch, or the inlet valve. If you are unable to identify and rectify the issue yourself, it is best to call in a professional appliance repair technician to investigate and fix the problem.
GE Washer Diagnostic - Leaking Water - WBSE3120B1WW - YouTube
Washing Machine Leaking From Bottom | Washing machine, Washer repair
How to Fix Water Leakage Underneath your Front Load Washing Machine
