Speed Queen Washer Not Draining
Speed Queen Washer Not Draining? Here’s What You Can Do
Are you facing the issue of your Speed Queen washing machine not draining? Don’t worry, you are not alone! This is a common problem faced by many people and can be easily solved. All you need to do is to identify and troubleshoot the issue.
Check for Obstructions in the Drain Hose
The first thing you should do if your Speed Queen washer is not draining is to check for any obstructions in the drain hose. Start by unplugging the washer from the power source and turn off the water valves. Next, unplug the hoses from the back of the washer and inspect them for any blockages. If you find any, remove them and then plug them back in. If the problem is still not resolved, you should move on to the next step.
Check the Drain Pump
If your Speed Queen washer is still not draining, you should check the drain pump. The drain pump is responsible for pumping the water out of the washer. If the pump is clogged or damaged, it will not be able to do its job properly. To inspect the pump, you will need to remove the back panel of the washer. Once you have done that, look for any clogs or damage to the pump. If you find any, you should replace it with a new one.
Check the Drain Filter
The next thing you should check if your Speed Queen washer is not draining is the drain filter. The drain filter is located at the bottom of the washer and is responsible for catching any debris that may be present in the water. If the filter is clogged or damaged, it will not be able to do its job properly. To inspect the filter, you will need to remove the bottom panel of the washer. Once you have done that, look for any clogs or damage to the filter. If you find any, you should replace it with a new one.
Check the Washer Tub
If the above steps do not resolve the issue, you should check the washer tub itself. Start by unplugging the washer from the power source and turn off the water valves. Next, remove the back panel of the washer and inspect the tub for any signs of damage or debris. If you find any, you should clean it out and then put everything back together.
Check the Water Level Sensor
If your Speed Queen washer is still not draining, you should check the water level sensor. The water level sensor is responsible for detecting the amount of water in the washer. If it is not working properly, it will not be able to detect the water level correctly. To inspect the sensor, you will need to remove the back panel of the washer. Once you have done that, look for any signs of damage or debris. If you find any, you should replace it with a new one.
Check the Inlet Valve
The final thing you should check if your Speed Queen washer is not draining is the inlet valve. The inlet valve is responsible for controlling the amount of water that enters the washer. If it is not working properly, it will not be able to control the water flow correctly. To inspect the valve, you will need to remove the back panel of the washer. Once you have done that, look for any signs of damage or debris. If you find any, you should replace it with a new one.
Conclusion
If your Speed Queen washer is not draining, there are a few things you can do to troubleshoot the issue. Start by checking for any obstructions in the drain hose, then check the drain pump, drain filter, washer tub, water level sensor, and inlet valve. If any of these components are damaged or clogged, they should be replaced with a new one. With a little bit of troubleshooting, you should be able to resolve the issue quickly and easily.
IPSO / Speed Queen Washer Not Draining – LaundromatHowTo
Speed Queen Washer - Water not draining - Diagnostic & Repair - YouTube
speed queen washer won't drain - burrel-hug
